Zakres cen: od 12,67 zł do 18,20 zł
Carpenter’s saw made of alloy steel with the addition of chrome and vanadium.
Intended use
The Koronet carpenter’s saw is designed for cutting any type of wood along and across the fibers. Recommended for cutting softwood, hardwood, plywood, chives and chipboards (hardened blade version).
Saw characteristics
| Saw | 100-120 Mpa |
| Stress | approx. 10 tons |
| Opening | 0.3 – 0.8/page (opening to 1/2 of the height measured from the top) |
| Saw | 5-7 hours + 12 hours saw rest |
| Cutting | 20-35 m/s |
| Sharpening | recommended grinding wheels: dry- ceramic grinding wheel 95A80K (or L) wet-grinding wheel 95A80L (or N) resin grinding wheel |
| Hardened | 58-60 HRC |
| Hardness of the non-hardened | 41-44 HRC |
| Hardness of the carrier | 41-44 HRC |
The thickness of the cutting belt is calculated from the formula: s=diameter of the rotary wheel (mm) / 1000
| Opening | Minimum | |||||
| b [mm] |
s [mm] | t [mm] | hard | Medium | Soft | radius [mm] |
| 10 | 0.6 | 6.3 | 0,3-0,4 | 0,4-0,5 | 0,5-0,6 | 50 |
| 15 | 0.7 | 6.3 | 0,3-0,4 | 0,4-0,5 | 0,5-0,6 | 100 |
| 20 | 0.7 | 8 | 0,3-0,4 | 0,4-0,5 | 0,5-0,6 | 150 |
| 25 | 0.7 | 8 | 0,3-0,4 | 0,4-0,5 | 0,5-0,6 | 200 |
| 30 | 0.8 | 10 | 0,3-0,4 | 0,4-0,6 | 0,5-0,7 | 300 |
| 35 | 0.8 | 10 | 0,3-0,4 | 0,4-0,6 | 0,5-0,7 | 400 |
Wyłączny dystrybutor na rynek polski
